In an attempt to make the fastest ATS out there we pushed through #4 with stock internals. Went back and had it rebuilt with 6466 turbo , oversized intercooler, custom hot/cold piping, built tranny, forged pistons and rods, cold air intake, Downpipe, tuned computer for 600hp+, e85 set up, meth injection. ported and polished head, intake, and throttle body. Long story shot I was a dumb ass andut some bad(not high enough octane, e15 not e85 despite being told by the station it was the same thing they just called it something different) gas in it causing #1 to detonate and damage the piston. ordered a new set of forged pistons from zzp since I couldn't find just 1 and now that the block is out and at the machine shop the cylinder wall is beyond repair and will have to be bored rending my forged internals useless. Anyways everywhere I have looked I can only find compete engine? Any recommendations for just the block so I can swap all my stuff? or just stop banging my head against the wall with a 4 bannger and put my 6.2 in there.
↧