Just throwign this out... Lights in the ATS are very dim, I do like the look and feel it gives to the car. I recently purchased a few different LED bullbson ebay. Ones for the vanity mirrors (fuse).
http://www.ebay.com/itm/4-x-White-3-...178230?vxp=mtr
THEY ARE BRIGHT AS HELL!
for the rest of teh interior I bought these first
http://www.ebay.com/itm/281356933645...%3AMEBIDX%3AIT
They were great, but they still provided dim light because of how they are shaped. So I ended up buying these
http://www.ebay.com/itm/251539151089...%3AMEBIDX%3AIT
These were a little brighter... There is one more on there if that looks like ping pong paddles, I was going to try them but I don't want it way too bright in there... My other concern is will they fit. I used these in all places.. This includes the glove box the floor boards, the doors, top main lights, and then, I also used them for the license plate lights. Looks clean... If you go on there there are some Cree backup bulbs, same kind t10 wedge... I got those they are 35 watts, and they are BRIGHT!
Try it out you will like the way it looks inside! They are cheap and very easy to install, the hardest ones are the lights in the back seat. Oh and one more thing, using the reverse light I ended up putting the oem one in the trunk as these didnt provide endough light, and the small bulb in there barley did anything. That oem reverse light is bigger and gives it a little more light.
http://www.ebay.com/itm/4-x-White-3-...178230?vxp=mtr
THEY ARE BRIGHT AS HELL!
for the rest of teh interior I bought these first
http://www.ebay.com/itm/281356933645...%3AMEBIDX%3AIT
They were great, but they still provided dim light because of how they are shaped. So I ended up buying these
http://www.ebay.com/itm/251539151089...%3AMEBIDX%3AIT
These were a little brighter... There is one more on there if that looks like ping pong paddles, I was going to try them but I don't want it way too bright in there... My other concern is will they fit. I used these in all places.. This includes the glove box the floor boards, the doors, top main lights, and then, I also used them for the license plate lights. Looks clean... If you go on there there are some Cree backup bulbs, same kind t10 wedge... I got those they are 35 watts, and they are BRIGHT!
Try it out you will like the way it looks inside! They are cheap and very easy to install, the hardest ones are the lights in the back seat. Oh and one more thing, using the reverse light I ended up putting the oem one in the trunk as these didnt provide endough light, and the small bulb in there barley did anything. That oem reverse light is bigger and gives it a little more light.